How to Tint Headlights with Spray

While driving behind a blacked-out car, we've all observed their 'tinted' headlights. If done correctly, this might be an exquisite sporty style or else a dangerous misstep.

When many customers enter their local auto stores, they are seeking spray paint to start painting their headlights. These tint sprays come in a variety of colors and may be used on both taillights and headlights.

A brighter and deeper tint sprays are available for taillights. There are various color possibilities for headlights and fog lights to meet your demands, like yellow, green, blue, red and so many colors in between.

Not only can you stylize your lights safely and efficiently, but it also recovers them, erasing the 'hazy' appearance!

Are Tinted Headlights Legal?

Once you continue, you must first verify whether tinted headlights are permissible in your state or country. Since most states do not have regulations that specifically address tinted headlights, this may be a bit complicated.

However, you should be aware that this change may be viewed as a breach of other motor vehicle laws.

Another thing to bear in mind is that your headlights must be able to emit light within the range permitted by state legislation to be considered roadworthy. Tinting your headlights will, of course, change how far they can light up in front. Things That You Need....

For Cleaning the Headlights

  • Warm water
  • Liquid Detergent soap
  • Clean cloth or sponge
  • Sandpaper (If needed)
  • Rubbing alcohol or Coca-Cola

For Applying Tint Spray

  • Headlight tint spray
  • Masking Tape
  • Clearcoat spray with UV protection
  • Disposable mask

Steps of Applying Headlight Tint Spray

Step 1

Remove the headlight assembly from the vehicle.

Step 2

It's necessary to start with a clean set of headlights to ensure that the spray uniformly coats the surface.

Dirt and grime may be removed off the headlight lens with soap, water, and a microfiber or lint-free cloth. If you're going to use a spray tint, prepare the lens by sanding it with a 2000 grit wet/dry sandpaper and soapy water.

Wipe off the surface with rubbing alcohol to make sure it's clear of grease and dirt. If the headlight lenses are still foggy and clouded after cleaning, use a headlight repair kit to clean the plastic out before adding the tint.

Step 3

For the best results, read and follow the instructions that came with the aerosol (spray) tint. Select a spray tint made specifically for use in headlights. Wearing protective gear, such as a disposable mask, before applying any spraying product is highly suggested to avoid breathing the spray.

Step 4

Prepare your workspace and the headlight lenses. Use masking tape to cover any additional sections that you don't want to be sprayed. Placing the lens on a clean, solid work surface is essential.

Step 5

Start with a thin layer on one headlight at a time. Maintain a one-foot distance from the surface by holding the spray can parallel to the lens.

Move the spray aerosol sideways as you spray the product. Make sure you don't spend too much time in one place.

Step 6

Between jackets, take a pause. When spraying tints dry, they usually darken.

Wait until the surface is half-dry but still wet to prevent adding too much product. It should take about 20 minutes to complete this task.

Check the taped parts that have been sprayed to see if it is ready for another coat. Do not touch the surface of the lens.

Step 7

Using the same method, apply a clear coat. After the tint has dried, apply a clear coat to give it a better finish and to protect it from UV rays and peeling.

Step 8

Allow at least eight hours for the tape to dry before removing it. Let the headlights dry for at least 12 hours after applying a layer of clear coat. Wait until the lenses are dry before removing the adhesive.

Step 9

Test the light output after reinstalling the headlight assembly. The final step is to reinstall the headlight assembly on the vehicle and verify that the light output after tinting complies with regulatory standards.

If you believe your freshly sprayed headlights are too dark, you should consider replacing the present bulb with a brighter one.

Best Headlight Tint Spray

By picking an aggressive, unique, sophisticated, gentle, or delicate style, you may end up showcasing your originality and imagination. Choose from a broad spectrum of hues, ranging from light smokiness to practically black, blue, yellow, or pink, and you might end up with some very amazing results that fit your personality well.

1) VHT SP999 

2) Dupli-Color ECWRC8157

3) Rust-Oleum Automotive 253256

4) Plasti Dip Performix 11220 

Benefits of Headlight Tinting

  • The tint shields the car's lights from scratches, chipping, and road debris.
  • Because of dust and UV radiation, it decreases the danger of lights turning yellow, dirty, and toneless. The majority of headlight tints are UV and temperature-resistant.
  • You can make your automobile appear gorgeous with minimal investment and a quick modification like a tint. Choose a color (red, black, grey, matte dark hue), tone, and pattern that complement your style and gives your automobile a unique, clever, or bold appearance.
  • In certain circumstances, tinting your headlights improve visibility. When you tint the fog lights of an automobile with a yellow film, it improves visibility.

Final Note

Installing car light tinting may enhance the look of your vehicle. You can make your automobile stand out without spending a lot of money by installing eye-catching or attractive headlights and taillights tints.

Headlight tints are available in a variety of hues and tones to complement the window films you've previously chosen for your vehicle. The tint film comes in whole rolls or pre-cut sheets that are specifically intended for your automobile model.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: