How to Install Fog Lights?

Fog lights are an important component of a vehicle. They ensure the safety of the drivers and pedestrians. As the name suggests, fog lights are intended to increase the visibility of vehicles on foggy roads.

Fog lights emit a powerful bright beam that can be seen through fog and smoke. Conventional headlights cannot be used as an alternative to fog lights.

Installing fog lights in your car can be intimidating, especially when most fog light kits found on the market do not come with an instruction manual.

Fog light kits usually contain what seems to be a pile of wires and light bulbs. Here we will guide you through the installation process of fog lights.

Things You Will Need

  • A fog light kit
  • Fog light connectors
  • Relays
  • A set of screwdrivers
  • Cable ties
  • Multimeter
  • Wire loom
  • A set of ratchets and sockets
  • Electrical Tapes
Fog Light

Choosing the Right Fog Light

What kind of fog lights you should use depend on your vehicle. If the fog light you bought does not match the capabilities of the car in question, then they are bound to malfunction. There is a wide range of fog lights, even for a specific vehicle.

You also get to choose the color of the fog lights. Different colors are suitable for different environments. For example, yellow headlights are best for severe weather conditions, whereas white or blue fog lights are more ideal for snowy atmospheres. Blue and white fog lights usually create a glare that tires the eyes of oncoming drivers. So yellow fog lights are used more commonly.

Figuring out Where You Want to Install the Fog Lights

Most car owners tend to install fog lights on the bumper of their vehicles. Installing the fog lights in the bumper is easier because they often have slots in them. But it is not uncommon for your car to not have slots for this purpose.

You can still install the headlights using fixtures. The location of your fog lights will be necessary. The lights will not be properly utilized if you don’t place them appropriately.

Laying out the Wiring

Now you need to determine the appropriate layout of the wirings. It needs to be maneuvered so that the wires stay away from the heat from the exhaust. You also have to make sure the wires don’t get caught up in the spinning machinery of the vehicle. Again, you can refer to the wiring diagram provided with the fog light kit.

The inside panels of the steering wheel can be removed by unbolting them. But you have to be cautious as there are a lot of delicate parts here. First, the on/off switch needs to be placed somewhere that’s easy to reach. You can locate the positive connection by using the diagram on the fuse.

You need to plug in the positive connector with a fuse that can sustain 12V power. This way, the battery won’t be drained by the lights when you turn on the engine. Then you have to run the wires through the firewall from the engine bay.

Having the Wires Connected

Before reassembling the interior panels, you have to connect the wires of switches to the engine bay wiring. You can use the cable ties to manage the extra length of wires and tuck them away.

Now run the wires to where you placed the fog lights. Pull off the covers from the bumper to locate the connector harness. Now you can connect the wires to the battery terminal and then connect the wiring harness to your fog lights.

Mounting the Fog Lights

In the last step, you bolt in the fog lights. You can use the adjustment screws to orient the light. The fog lights kit might come with bezels. Attach the exterior bezels and use cable ties to tidy up the wires.

Final Words

Fog lights serve as a safety measurement for countless car owners. When the weather starts to change for the worst, these lights can help your vehicle become more visible to bystanders and other oncoming cars. Even after you have installed fog lights, you still need to be cautious when driving on foggy roads.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: