How To Choose 12 Inch Light Bars?

12-inch light bars keep a balance between high and low brightness, price, and size. They are bigger and brighter than 4” ones. However, they are also smaller and within the portable limit than the 16” or longer bars.

It is an excellent move to get them as auxiliary lighting for off-roading, boating, or in your garage. Their spread light covers a large space.

While the market has many promising light bars, not all can be entitled as the best. Fortunately, they are also not hard to come by. You can check our list of the ten best 12-inch light bars below and choose one from them. The buying guide afterward can help you decide on one.

List of 12 Inch LED Light Bars

1. Nilight 18023C-A Triple Row Flood Spot Combo Bar

Nilight 18023C-A Triple Row Flood Spot Combo Bar

Combo beam with triple row and nest reflector cup design in the middle for extreme light efficiency


  • The reflector cups let the light beams shoot in multiple directions.
  • You don’t need to get additional hardware for it. Everything is included in the package.
  • For a current flow constancy, Nilight added top-quality inductance.
  • The beam angle is adjustable to spot, flood, or combo.


  • It is not DOT approved for on-road use. You can only take it for off-roading or other places like the garage, garden, tractors, snowplow, etc.

Nilight is a brand that pleases many people who look for lighting products. Their 18023C-A Bar is a notable item from them. With a size of 12-inch, it features three rows of LEDs that emit a 6,000K white color. But you can also get the amber-colored version.

Upon consuming 300W power, the bar provides illumination of 30,000 lumens from the multiple LEDs. It contains a controlled beam that focuses more downward by default with three angle options. You can choose among flood, spot, or combo.

There is a set of screws and an Allen wrench in the package. It allows you to install the bar without additional hardware needed. You can adjust the beam angle too by 45°. The mounting can be over within four easy steps.

The bar contains 20-pieces of LED chips that provide a high-quality light beam. Meanwhile, the inductance keeps the current flow unchanging, causing the color and brightness to stay the same. Their reflector cups have an epic design that allows for multiple-direction lighting.

For heat dissipation, Nilight used 9PCS cooling fans that rotate at a high speed. It features a diecast aluminum body and thermal grease that ensures ultimate cooling. The body has a higher waterproof level of IP67 and a low wind level for proper airflow.

2. Zmoon 12 Inch LED Light Bar 264W

Zmoon 12 Inch LED Light Bar 264W

IP67 Waterproof Five Rows Spot & Flood Combo Beam LED Fog Light Bar for Truck ATV UTV SUV Tractor Boat Weeder etc.


  • The combination of 15° spotlights and 170° floodlights works wonder in dark places.
  • Their bodies have waterproof, dustproof, and shockproof. Meanwhile, the mounting brackets are durable that keep the body intact on rough driving.
  • You can finish the installation following the easy steps explained by the brand. It is also possible to adjust the beam angle up to 360°.


  • It uses COB chips, which aren’t that high-quality.
  • The light bar is not that bright, considering it should emit 26,400 lumens.

Now we have the LED bar from the Zmoon brand that displays an attractive look and has a durable body. You can use the item for multiple places, including tractors, trucks, UTV, ATVs, SUVs, boats, etc. It is a perfect item for a quality combo beam between spot and flood angle.

264W power consumption is required for the light to emit a lumen of 26,400. The beams you get are clear and crisp that don’t contain dark spots or shadows. They feature a 15° angle for the spotlights with three rows and 170° for floodlight with two rows.

Zmoon went overboard in the build quality of the light bar. The body is made of diecast aluminum with resistance to water, dust, shatter, corrosion, and scratches. By combining that with an effective heat-dissipation system, the bar lasts for a long time.

But the body isn’t the only thing that got attention. The mounting brackets you get in the package feature hardened alloy, which is more stable than plastic ones. It also secures the bar firmly on bumpy terrains. On top of that, the wiring used on the product contains tinned copper that ensures utmost safety. You can run the light bar from -40° to 185° F.

3. Nilight – NI06A 12Inch 72W LED Light Bar

Nilight – NI06A 12Inch 72W LED Light Bar

Combo Led Light Bar Off Road Lights Boat Lights Fog Light Driving Lights LED Work Light for Trucks


  • The mounting brackets contain stable connections that keep the light bar firm.
  • The thermal grease and aluminum housing for the heat sink keep the body cool after prolonged use.
  • The light bar doesn’t consume that much energy.


  • The bar cannot stop moisture from forming up inside.

We have another product from the reputable brand Nilight. The NI06A Light Bar is a bit different from their 18023C-A. It contains two rows of LED where the spotlights are in the middle and floodlights are at the edge. The 12” bar is usable as offroad light, boat, household, and factories.

If we measure correctly, the exact size is 11.8 by 3.1 inches. You can install it with ease in front of the windshield of your truck, jeep, SUV, etc. The LEDs utilize chips of the high quality that Nilight customizes themselves. It ensures constant lighting without any dimming.

You get light at multiple angles while the density of the particles stays high. With only 72W power consumption, it is really energy-efficient. You get a long and bright light of 4900 lumens for many months and years of use. The beam adjustment limit of the housing is 45°.

The IP67 waterproof level keeps it okay in the rain or such weather. There are rubber pads and EVA strops on the edges for further protection. They remove any space between the wires to let water inside. The heat dissipation system is like the previous Nilight light bar, utilizing 9PCS fans and thermal grease.

4. BEAMCORN Single Row LED Light Bar

BEAMCORN Single Row LED Light Bar

10000LM Combo Spot Flood Light for Offroad Trucks ATV UTV SUV Boat Waterproof


  • The light bar is so slim and doesn’t take too much space.
  • They have certifications from CE and RoHS.
  • The brackets are adjustable both horizontally and vertically.


  • There is no wiring harness in the box.
  • Moisture can build up inside what is advertised as a sealed design. It may need occasional cleaning.

If you want a light bar with only one row, then BEAMCON Light Bar may please you with its traits. The item also has a 5” version. You get a combo beam of 10,000 lumens with a power of 80W. It is the perfect offroad lighting for a truck, SUV, ATV, boats, etc.

Note that when installed with the mounting bracket, the total length of the whole setup will be 14 inches. Its slim design doesn’t require that much space to mount. And since there is a beam adjustability feature, you can position the bar housing at the desired angle.

The light bar has CE and RoHS certifications, which ensures their quality. You can notice their durability because of the diecast aluminum housing and IP67 lens parts. These light bars feature an excellent cooling design that lets enough air flow to remove the heat quicker.

Since there are all the mounting hardware and brackets in the box, installation should be an issue. You get an instruction manual with details as well.

5. oEdRo LED Light Bar 12Inch 135W

oEdRo LED Light Bar 12Inch 135W

IP68 Grade Work Lights Off Road Light Fit for Pickup Jeep SUV 4X4 ATV UTE


  • The 10D design of the reflection cups ensures a multiple direction spread lighting.
  • You get a wondrous beam angle for the spot and floodlights.
  • They have a high waterproof level of IP68. You can use the light under any weather condition.


  • The light features a mounting bracket that stays at the bottom instead of the sides, which is incompatible with many vehicle models.
  • The brackets do not have a durable construction.

We have heard about 3D, 4D, and 5D light-reflection cups before. But the OedRo LED Light Bar surprised us with its 10D design.

It sends the light beams in ten directions, providing a spread pattern. You get a lumen of 11,240 with 135W.

The light bar features a fish-eye polycarbonate lens design proven to be more effective. This 12-inches light with spot and flood combo comes with 8.25 inches wiring harness in the package with plug-and-play. You can install the entire thing using the mounting brackets at any suitable place on your vehicle.

We should mention that the light has other variations with 20-, 23-, 26-, and 32-inches sizes. The operating temperature of the product ranges from -40° to 185° F. You get a spot beam of 30° and a flood beam of 60°, because of its 10D design. Then there is the combo beam. The adjustability of the beam angle is 45°.

There is silica gel on each side of the bar for complete waterproofing. Meanwhile, the edges have rubber covers that repel water. Its IP68 can tackle immersion for a long time. Aside from the aluminum housing, the heat dissipation system has an oxidization tech for faster cooling.

6. Rigidhorse 12 Inch LED Light Bar Single Row

Rigidhorse 12 Inch LED Light Bar Single Row

Flood & Spot Beam Combo 10000LM Off Road LED Light Bar Driving Light for Pickup SUV ATV UTV Truck Roof Bumper


  • The light bar features OSRAM LED chips for better quality light beam than regular light bars.
  • Their mounting brackets stay on the side and hold the bar with stainless steel parts.
  • The single row of light contains 8D reflection cups to spread the beams more.


  • The product doesn’t come with any wiring or switches.
  • The waterproof level is not high enough for heavy rain.

Many of us want LED light bars with side mounting brackets and an attractive look. That is why Rigidhorse released their 12 inches light bar that emits 10,000 lumens of bright light for complete illumination of the road ahead. You can mount it on the roof, in front of the windshield, or any other suitable place for your vehicle.

Rigidhorse used the OSRAM chips, a chip-type renowned for its super clear and long-distance light. It also does not create any dark spots or dark ranges. So, the light beam slowly dims at its edge. They are also pretty long-lasting.

The beam pattern is a combination of flood and spotlight. It takes 140W to operate. The ground gets an illumination of 6,000K, the highest shade of white lighting.

For the body part, aluminum alloys of the top-grades were used. Because of their high thermal conductivity, they do not get damaged after a prolonged operation. The entire body features ingress protection of 67.

Meanwhile, the mounting brackets contain stainless steel connections that keep the bar in its place without any shaking. You can adjust it up to 360° as you want.

7. AUTOSAVER88 12Inch LED Pods Lights

AUTOSAVER88 12Inch LED Pods Lights

IP68 Waterproof Led Work Light Spot & Flood Combo Beam for Truck Pickup SUV ATV


  • The light bar is pretty cost-effective. It is one of the best budget options.
  • The reflector cups contain acrylic layers that prevent optics loss.
  • 11PCS fins on the heat dissipation allow faster cooling.


  • The light bar is more suited as a spotlight than a floodlight because of its less spread beam.

Next up, we have a light bar from AUTOSAVER888 that you can also consider a LED pod for its versatile design. The 12-inch bar has an impressive IP68 weatherproof level, letting you use it in the rain, snow, or dusty places for a decent amount of time.

72W power consumption is not bad for a light bar, considering its bright output with a 6,000K color temperature. AUTOSAVER888 used quality 3030 LED beads in their making.

Meanwhile, there are multiple direction reflective cups with extraordinary acrylic covers to minimalize the optics waste. You get a combo beam from the bar.

The heat dissipation system contains 11PCS cooling fins. The fans have aluminum bodies for better heat transferring.

For durable construction, the company used iron screw sets on the brackets. It ensures high durability, and the metal is resistant to corrosion. You get the screw set in the package. If you want a different sized light bar, 4, 32, 50, and 52” versions of it are available for you.

8. LITE-WAY Bar-Liteway Triple Row LED Light Bar

LITE-WAY Bar-Liteway Triple Row LED Light Bar

Spot Flood Combo Beam 30000 LM Off Road Driving Led Work Lights for UTV ATV Jeep Truck Boat


  • The IP68 parts on the light bar can block water from going inside the lenses.
  • The beam angle is more spread than other light bars of the same quality. It gives a 30° spotlight and 170° floodlight.
  • Adding CREE LED allowed the bar to provide 30,000 lumens at low power consumption. It lets 97% light transmission.
  • The lens cover is PMMA, which is tougher than polycarbonate.


  • Some people received bars of different sizes. Make sure to measure it when your item arrives.
  • While it has high waterproof, moisture can still build up inside after years of use.

The LITE-WAY LED light bar can emit a light beam of 30,000 lumens, an ideal amount for off-roading in dark areas. They made a praiseworthy item by combining the triple row design with advanced reflator cups. You can take it for your vehicle, work, household lighting, etc. This item is CE-approved.

The ground above your vehicle will get a combo beam of spot and floodlight that features a really wide angle. It makes driving in the dark much safer. Because of the white and bright light, you won’t complain about a lack of visibility again.

On the rear part of the light bar, there is the aluminum alloy heat dissipation system. It is pretty big and allows for high airflow to remove heat at a faster rate. LITE-WAY added IP68 parts to the light bar, which tackles high-pressured jets and immersion for a long time.

Since the width and depth of the bar is 2.75 by 2.56 inches, it takes comparatively lesser space than many similar bars on the market. You get durable mounting brackets and screw sets to secure it anywhere on the vehicle.

9. Lumitek 1PCS 12″ 72W Led Light Bar

Lumitek 12 inch 72W Led Light Bar

Light Bar Waterproof Driving Lights for Trucks, Off-Road Vehicle, ATV, SUV, UTV, 4WD, Jeep, Boat


  • It is very cheap in cost. Check it out if you want something at a low rate.
  • The polycarbonate lens and diecast aluminum housing works wonder to keep the light intact under harsh conditions.
  • The installation process is easy.


  • Some people received a defective light bar or a package without mounting hardware.

The Lumitek LED light bar consists of tough aluminum housing and lenses. You can get both spot and floodlight combo beam from it. This highly versatile bar can be installed almost anywhere with a suitable base. You can also check out the other size variations.

This bar takes 72W to operate. You can notice the multiple directional reflection cups on the light with quality LED beads. They generate and send the 6,000 lumens of light ahead of the bar.

In the back, there is a large heat dissipation to remove the high amount of excess heat that the bar creates. Meanwhile, the ingress protection of 67 protects the bar from drizzling and snow.

We don’t think you will face any issues with the installation. The light bar features a simple and easy mounting style that takes four steps.

10. BUNKER INDUST Side Shooter LED Light Bar

BUNKER INDUST Side Shooter LED Light Bar

90W Work Lights Waterproof Off Road Fog Driving Bumper Light for ATV UTV Truck Boat


  • It is the best floodlight bar that you can get for its 200° flood angle utilizing the side-shooter LEDs.
  • The spotlight reaches so far in the distance.
  • You get an additional wiring harness with a DT connector. It has a universal fitting. You can use it on light bars of up to 52” sizes.


  • The light bar causes interference to the RF.

Our final product is not to underestimate as it excels at durability, performance, and looks. The LED light bar from Bunker Indust comes with CREE LEDs with dual rows that provide a 30° spot and 170° floodlight angle. Similar to many of our products above, you can use this bar on a variety of applications.

There are 50-pieces of LED beads that spread at two sides, and 40-pieces stay at the middle. The 6,000K colored beams have a brightness of 11,000 lumens with only 90W consumption. You can operate it on 9-30 voltage.

Surprisingly, there are also some LED beads at the edges of the bar. It creates an even wider light output that spreads further towards the side. The side-shooters have a 30° beam angle. So, the total floodlight angle here is 200°.

The additional mounting hardware lets you mount the light bar at any angle and position that you want. Its heat sink at the back features an advanced design that cools the bar faster. Because of the waterproof rubber and the IP68 body components, you can even drive your vehicle in the rain or shallow water without damaging the bar.

Buying Guide

Fortunately, quality light bars with 12” sizes are easy to come across. But the fact that there are so many of them also causes a problem. You can follow your priority list if you cannot decide on one item among multiple 12” light bars.

Remember that you need a perfect light bar for safe off-roading or get enough bang for the buck. Without further ado, let’s look at the aspects of a 12” light bar you should check when buying it.

Shape of the Light Bar

It is true that you are only checking out the 12” light bars. But the length is not the only thing that can affect your experience.

Also, look at the measurement of it. Many light bars with more than one row of LEDs come with a wide body. It depends on your preference and whether there is enough space to mount it.

Number of LED Rows

A 12” light bar with a single row often lacks one thing. And that is to have enough LEDs to get a spread illumination. Bars with two or three rows can give you a much wider light.

They also provide a brighter light output because of more LED beads. However, multiple row bars consume higher energy and may get hot quicker. They also often have a wider body shape.

Check if your vehicle (or wherever you want to install it) has enough space for it. You also need to connect it to a power source that can operate it flawlessly.


Since light bars are illegal on the road anyway, you can go for a really high brightness without the worries of blinding oncoming drivers. However, remember that high brightness draws higher energy and heats the bar faster.

It may also be uncomfortable to look at an overly bright light for a long time. Most light bars come with a brightness range between 6,500 to 30,000 lumens. We suggest going for 10,000 to 20,000 LM for clear visibility.

Beam Angle

Some light bars come with a spot angle, some with a flood, and others come with a combo beam. Note that a spotlight provides a beam that reaches a far distance.

Meanwhile, floodlight gives a wide and spread light that helps under fog and rain. The combo beam combines both angles. You may not get enough versatility on a combo light bar.

So, you can try getting two 12” light bars where one is spot, and the other is floodlight. This way, you can only get the beam you want or get both.


LED light bars get pretty hot and need a well-built body to stay intact. A 12” light bar needs an aluminum housing with polycarbonate or PMMA lenses.

Meanwhile, the heat dissipation should contain enough technology for a quick cooling process. It is even more necessary for bars with higher brightness or more LED beads.

Additionally, the bar should also have a waterproof level of at least IP67. Otherwise, it won’t survive the rain. One thing people mistake is thinking that IP68 means total water resistance.

While it is the highest waterproof level, it cannot guarantee the utmost safety against water. You mustn’t drive your vehicle in the rain with a light bar or pod for a really long time.


Look for the necessary mounting hardware with the 12” light bar. Since light bars aren’t flush-mounted, you will need mounting brackets and screw sets.

Durable hardware and joints are mandatory to keep the bar secured and prevent shaking. Check whether the brackets are adjustable to let you have the desired beam angle. You may also need wiring harnesses to install some light bars.

Final Note

While we may have advised you to get more than one of 12” light bars, we don’t suggest getting them in one go. You do not know if a product is to your liking until you actually try it. So, the best course of action is to buy one first, check its credibility, and then get more afterward.

Many manufacturers fail to make their light bar completely waterproof even after their promises. We often see light bars with IP67 getting moisture inside them. If you face the same issue, you can clean the interior with expert help. But we hope that you don’t need to go through this extra hassle.

Leave a Comment